As the weather turns colder, condensation and mould can form more easily. Are you experiencing condensation and mould on windows, walls or ceilings?
Are the window surrounds or bathroom ceiling going mouldy like in the images below?
If areas of the property look like this, it is almost certainly not a defect with the property itself, but a result of the way you are using the property.
Therefore, as it is your fault and you the tenants need to take immediate action to prevent further damage. Preventing the problem in the first place will be far cheaper for you than the cost of the subsequent repairs. Please read through the following information on the causes, effects and ways to avoid condensation and the resultant mould forming.
There is always some moisture in the air, even if you cannot see it. If air gets cold, it cannot hold all the moisture produced by everyday activities and some of this moisture appears as tiny droplets of water, most noticeable on windows on a cold morning. This is condensation. It can also be seen on mirrors when you have a bath or shower, and on cold surfaces such as tiles or cold walls and ceilings.
Have you ever noticed you get more condensation on cold beer if you’re on holiday in a warm humid country; well it’s exactly the same principle. Only when it is forming inside a property, it’s a problem that requires tenants to take swift action.
If damage has been caused to the property because tenants have not properly managed condensation, then repairs can be charged to the tenants. However, by following this advice, you should be able to avoid any damage and thus avoid any associated repair charges.
Dampness caused by excessive condensation can lead to mould growth on window frames/sills, walls, ceilings, furniture and tenants’ clothes.
Also, damp humid conditions provide an environment in which house dust mites can easily multiply, which can affect asthma sufferers.
Open the curtains and wipe dry your windows and windowsills every morning, as well as surfaces in the kitchen or bathroom that have become wet. Wring out the cloth in a sink rather than drying it on a radiator, or the water vapour is going straight back into the air in the property.
First treat any mould in the property, then deal with the basic problem of limiting the amount of condensation you are creating to stop mould reappearing. To kill and remove mould, wipe down or spray walls and window frames with a fungicidal wash or very diluted bleach. Ensure that you follow instructions for its safe use. These fungicidal washes are available at local supermarkets or DIY stores. Wash affected clothes and shampoo carpets.
Please read through this carefully and follow the advice. Sorry to labour the point, but we cannot stress this enough! This advice is here to help make living in the property a more pleasant experience and to limit any charges to tenants.
The main factors that cause condensation in a property are:
You need to look at all of these factors to cure a condensation problem.
Our everyday activities add extra moisture to the air inside our homes. Even our breathing adds some moisture (remember breathing on cold windows and mirrors to fog them up?). One person asleep adds half a pint of water to the air overnight and at twice that rate when active during the day. To give you some idea as to how much extra water this could be in a day, here are a few illustrations:
This illustration is for a 2 person property. Imagine the increase if there are 6 people in the property breathing, showering, drying clothes, cooking and washing up? Therefore, it is vital that you reduce the potential for condensation by producing less moisture;
Ventilation dramatically helps to reduce condensation by removing
moist air from your home and replacing it with drier air from outside.
Reduce condensation build up by ’cross-ventilating’ your home - opening to the first notch a small window downstairs and a small one upstairs. They should be on opposite sides of the house. At the same time, open the interior room doors, this will allow drier air to circulate throughout the property. The air needs to be able to flow through the property like in the image below.
Cross-ventilation should be carried out for about 30 minutes each day.
Note: Make sure that accessible windows will not cause a security problem - remember to close them when you go out.
Warm air can hold more moisture than cooler air, which is more likely to deposit droplets of condensation round your home. Air is like a sponge; the warmer it is, the more moisture it will hold. Heating one room to a high level and leaving other rooms cold makes condensation worse in the unheated rooms. That means that it is better to have a medium level of heat throughout the house.
Still don’t believe that condensation and mould are a problem caused by tenants and are not a problem with the construction?
Just type in ‘condensation mould’ into any search engine for thousands of results. Alternatively, download the following documents from City of York Council.
REMEMBER - the only lasting cure for mould is to reduce the amount of condensation you are creating by using the heating more and ventilating the property effectively. It’s that simple.